|
The Woodford RHY1
provides water availability for window washing, cleaning of
condenser coils, cooling towers and other types of roof
equipment. Valve body of hydrant is drilled and tapped with 1/8
drain hole which must be piped to a drain location.
|
|
Patent
Pending |
|
The RHY1 allows for installation flexibility
since it is not necessary to install hydrant when hydrant
support is mounted to the roof. The hydrant support utilizes a
3 opening that allows the hydrant to be installed later if
desired. All necessary mounting hardware for proper installation
on a commercial roof is supplied, including a 2 degree shim for
pitch adjustment.
|
|
Hydrant Features: |
| Rod Guide -
Eliminates side pull on rod, reduces wear on packing,
packing nut & stem. |
| Adjustable Link -
Provides easy and positive adjustment of the lever lock
tension. |
| One Piece Variable Flow Plunger
- Large cushion type seal for longer life-is not easily
damaged and assures shut-off even when foreign particles
are present. |
| Maintenance & Repair
- All repairs can be made from top of unit without
removing hydrant. Parts are readily available. |
|
|
Specifications: |
| 48 ½" Overall Length - See Spec
Sheet for Rough-In Dimensions |
| 1 NPT Female inlet
|
3/4 Brass hose nozzle
Optional at Additional Cost: 1 brass
hose nozzle
|
| 1 1/4 Galvanized pipe |
| 1/8 NPT Drain hole -
(Must be piped to a drain location) |
| Cast iron hydrant support
components |
| Well seal tightens between
hydrant support and hydrant pipe |
| EPDM boot to cover well seal and
top of hydrant support |
|
2Ί shim supplied - For installation
on pitched roofs if needed |
| Maximum Working Pressure:
125 p.s.i. |
| Maximum Temperature:
120° F |
 |
|
