Models 75
B75 and RB75 Series
NEW 360° SWIVEL
INLET
The Model 75, B75 and
RB75 are anti-siphon wall hydrants designed for use in mild climate
areas or within temperature controlled buildings. The Model 75 is only
2-5/8” deep and fits inside a stud wall. The B75 fits inside a 4”
wall.
 |
|
Specifications
|
| ANTI-SIPHON VACUUM BREAKER - NIDELÒ Model 34HF with ¾ inch male hose thread nozzle, approved under
ASSE Standard 1011, Canadian Standards Association, listed by IAPMOÒ
and accepted by U.S. Department of Health |
| VALVE SEAT –Permanent type brass
valve body with large hemispherical seating surface |
| NO LEAD SOLDER – All Solder joints |
| STEM – Hardened stainless
steel stem resists damage |
| PACKING NUT – Adjustable
packing nut. Lock nut prevents packing nut from loosening. Teflon impregnated packing |
| EXTERIOR FINISH – Standard chrome
. Optional – Polished brass or rough brass |
| MAX PRESSURE - 125 p.s.i. |
| MAX TEMPERATURE – 120 degrees F. |
| SHIPPING WEIGHT – Model 75 –
3.1 lbs -- Model B75 – 10.2 lbs. |
| FOR NON-FREEZING AREAS ONLY |
This product is tested and listed to an
ASSE standard. The standard states that this product is not intended to
be used for over 12 hours of continuous use.
|
