| Model
65 and B65 Series
The Model 65 is an automatic draining, freezeless wall
hydrant with anti-siphon vacuum breaker. The Model B65 is in a flush mounting wall box.
Each model is designed to blend in with modern architecture for installation on
restaurants, schools, office buildings, churches, apartments, motels, stores, shopping
centers and industrial buildings
 |
|
Specifications
|
| MODEL 65/B65 – Approved
under ASSE Standard 1019-B and listed by IAPMO. Meets
Government Specification WW-P-541b Type 205.. Conforms to ASME / ANSI A112.21.3M and the
hose coupling threads conform to ASME / ANSI B1.20.7 and ASME / ANSI B1.21M |
| VACUUM BREAKER –
ANTI-SIPHON - NIDEL Model 34HA with ¾ inch male hose
thread, approved under ASSE Standard 1011, Canadian Standards Association, listed by IAPMO and accepted by U.S. Department of Health. |
| VALVE SEAT – Permanent
type brass valve body with hemispherical seating surface |
| VALVE – One piece
valve plunger accurately controls both flow and drainage with a minimum number of turns
and without need for adjustments. |
| DRAIN – Under nozzle
away from hands of operator and with a lip to divert water away from building |
| CASING – Copper tubes |
| NO LEAD SOLDER - All solder
joints. |
| STEM – Hardened
stainless steel stem resists damage. |
| TEE KEY – Loose key
operates hydrant |
| OPERATING ROD – 3/8"
solid brass operating rod. |
| EXTERIOR FINISH – Standard
Chrome Optional – Polished brass or rough brass; Other Options: Anodized Aluminum Box |
| WALL CLAMP – Furnished
on all 65 series except close coupled. |
| MAX PRESSURE -
125 p.s.i. |
| MAX TEMPERATURE -
120 degrees F. |
This
product is tested and listed to an ASSE standard. The standard states
that this product is not intended to be used for over 12 hours of
continuous use.
|
