|
FEATURES |
SPECIFICATIONS |
| EXTERIOR FINISH - Brass |
ASSE Standard 1019 -Type B Approved
and IAPMO® Listed. Meets Government Specification WW-P-541b Type 205 |
| VALVE - Molded nitrile suitable for hot
water |
| NO LEAD SOLDER - All solder joints |
| PLUNGER - Hemispherical
cushion type |
ANTI-SIPHON VACUUM BREAKER-NIDEL Model 34HA with
3/4" male hose thread, approved under ASSE Standard 1011, by Canadian Standards
Association, listed by IAPMO®. |
| STEM SCREW -
DELRIN® |
| HEAD NUT - Brass |
MAX PRESSURE -125
p.s.i. |
| HANDLE - Metal (Optional Tee Key) |
MAX TEMPERATURE -120o
Degrees. |
| Note
to installer: Do
not lubricate
any part of the RK-25 repair kit or faucet. Lubrication can cause
accelerated deterioration of the rubber parts or cause abnormal operation
of the faucet |
|
NOTICE
- To close
and drain, turn handle clockwise until seated and water drains out of drain hole or faucet
may freeze and burst. Breaker Replacement is recommended every 3-5 years |
|
Warning - Faucet must
be installed with downward pitch toward nozzle or faucet may freeze and burst.
This product is
tested and listed to an ASSE standard. The standard states that this
product is not intended to be used for over 12 hours of continuous
use. |
