SPECIFICATIONS |
|
FEATURES: New for 08
• Internal, resetting pressure relief
valves prevents each casing tube from bursting in freezing conditions even
if a hose is unintentionally left on.
• Built-In Vent Float style Vacuum
Breaker
• Faucet drains automatically when
hose is removed |
| Permanent stainless steel seat will
not wire draw. |
| EPDM Packing
- To prevent leaking |
| Optional Loose Tee Key
With Deep Packing Nut |
| Faucet - drains
automatically when hose is detached |
| Vacuum Breaker - ASSE
1019 Type C approved *
CSA Certified * UPC Listed |
| NOTICE: Models 14,17, 22, V22 come
standard with the MH (Metal Handle) |
| Nozzle - 3/4" male hose thread |
| Valve Operating Threads - Full circle
threads on valve body and retainer |
| No Lead Solder - All solder joints |
| Seat Washer - Standard "O"
Size |
| Oval Handles
- Powder Coated Die Cast Aluminum |
| Max Pressure -
125 p.s.i. |
| Max Water Temperature - 120 degrees F |
| Optional: The
RK-PT kit
is available at additional cost to convert the hot side handle to a Push
to Turn. This will protect against accidental use. |
|
Warning - Faucet must
be installed with downward pitch toward nozzle and hose must be removed in freezing
weather or faucet may freeze and burst.
This product is
tested and listed to an ASSE standard. The standard states that this
product is not intended to be used for over 12 hours of continuous
use. |
